AQL 1.5
Meets medical standards for pinholes
Unigloves SOFT® NITRIL BLUE 300
Disposable nitrile examination gloves – latex-free, powder-free, blue, non-sterile, extra-long, suitable as chemical protection gloves.
Sold as a case of 10 boxes (100 gloves per box)
Code: 1410X
Product information
- Latex gloves washed offline ensuring ease of donning and increased comfort; powder free to stop hands from drying out and designed for use in dentistry, healthcare, food processing and engineering
- These single use gloves are made from optimal quality latex that provides high levels of elasticity and comfort, plus an ambidextrous fit means no hassle if you need to replace a glove
- The extra long beaded cuff gives extra durability and helps prevent liquid roll back whilst the medium weight construction provides a balance of strength and sensitivity, suitable for contact with food
- Textured palms and fingertips provide improved grip, particularly in wet or oily conditions and touchscreen compatibility allows you to use mobile and tablet displays without removing the gloves
- Latex examination glove, food safe, powder free, offline chlorinated AQL 1.5 in blue
UNIGLOVES SOFT® NITRIL BLUE 300 The Soft Nitril Blue 300 is an extra-long, food-safe hygienic and protective glove used in gastronomy and food production as well as in medical areas. The nitrile disposable glove has been tested in line with PPE Regulation (EU) 2016/425 and European standards EN 374, EN 420 and EN 455. The durable material is waterproof and protects against viruses, fungi and bacteria. The nitrile is free from latex, thiuram and protein, making this glove extremely skin-friendly. The micro-roughened fingers and palms ensure excellent grip on various surfaces. This non-powdered glove is easy to put on and remove thanks to its strong, cuffed sleeve. The ambidextrous design also makes it easy to put on and remove. The Soft Nitril Blue 300 is available in blue and sizes S, M, L and XL.
Colour
Blue
AQL (Freedom from Holes)
1.5
Palm Thickness (mm)
0.14
Finger Thickness (mm)
0.16
External Surface
Microroughened
Design
Ambidextrous
Cuff Type
Beaded
Sterile
No
Latex-Free
Yes
Powder-Free
Yes
Accelerator-Free
No
Silicone-Free
No
Phthalate-Free
Yes
Tested for Use with Chemotherapy Drugs
No
Anti-static
No
Touchscreen compatible
Yes
Gauge
Liner Material
Coating Type
Nitrile (Flat)
Coating Coverage
Fully Dipped
Food Approved
NitreGrip®
No
NitreGuard®
No
Sanitized® Treated
No
Hydrophobic
No
Reinforced
No
Impact Protection
Extended 300mm cuff
SOFT® NITRIL BLUE 300 gloves ensure no finger marks on metal or glass surfaces, maintaining pristine finishes
Conforms to the hand
Providing extra protection
Beaded cuff
Designed to conform seamlessly to the hand, these gloves provide a snug and comfortable fit, enhancing dexterity and reducing hand fatigue
Textured Palms and Fingertips
The beaded cuff design ensures a secure fit and prevents the gloves from slipping off
Touchscreen compatible
SOFT® NITRIL BLUE 300 gloves offer improved grip in wet or oily conditions, providing enhanced safety and control
Compliant with: Personal Protective Equipment Regulation (EU) 2016/425
EN374-4 Degradation levels indicate the change in puncture resistance of the gloves after exposure to the challenge chemical.
This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals. The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only and relates only to the chemical tested. It can be different if the chemical is used in a mixture.
It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may be different from the type test depending on temperature, abrasion and degradation. When used, protection gloves may provide less resistance to the dangerous chemical due to changes in physical properties. Movement, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time significantly. For corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.
Before usage, inspect the gloves for any defect or imperfections.
EN ISO 374-5:2016
The penetration resistance has been assessed under laboratory conditions and relates only to the tested specimen.
PPE certification (2016/425 Module B & Module C2) performed by:
Class I Medical Device
Other information
Contains accelerators which may cause allergic reactions.
 |
EN ISO 374-1:2016+A1:2018 | EN ISO 374-4: 2019 (%) |
| Sodium hydroxide 40% (K) | 6 | -5.3 |
EN374-4 Degradation levels indicate the change in puncture resistance of the gloves after exposure to the challenge chemical.
| Level | 1 | 2 | 3 | 4 | 5 | 6 |
| Time | >10 | >30 | >60 | >120 | >240 | >480 |
This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals. The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only and relates only to the chemical tested. It can be different if the chemical is used in a mixture.
It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may be different from the type test depending on temperature, abrasion and degradation. When used, protection gloves may provide less resistance to the dangerous chemical due to changes in physical properties. Movement, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time significantly. For corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.
Before usage, inspect the gloves for any defect or imperfections.
EN ISO 374-5:2016
| ✓ | ✓ | ✓ |
| Bacteria | Fungi | Virus |
The penetration resistance has been assessed under laboratory conditions and relates only to the tested specimen.
PPE certification (2016/425 Module B & Module C2) performed by:
CE: CCQS Certification Services Limited, Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin15, D15 AKK1, Ireland (Notified Body number 2834)
Compliant with: Medical Devices Regulation (EU) 2017/745
Class I Medical Device
Other information
Contains accelerators which may cause allergic reactions.
 |
Food safe |
 |
Single use only |
 |
Non-sterile |
 |
Does not contain latex |
 |
Store between 5 and 40 degrees Celsius |
 |
Store in dry conditions |
 |
Store away from direct sunlight and heat |
 |
Packaging is recyclable |
| Size (Alpha) | Size (Numeric) | Code |
|---|---|---|
| S | 14102 | |
| M | 14103 | |
| L | 14104 | |
| XL | 14105 | |
| XXL | 14106 |
For more information please see the Warehouse Data Sheet.